H-Stat DBS Series

CE Certification Logo ISO 9001 Quality Logo TUV Certification Logo Saso Certification On Demand


MAIN FEATURES

• Frameless integrated folded steel structure.
• The Double Skin casing consists of two walls with inner insulation, final casing thickness is 20 mm.
• Washable double-layer acrylic nylon media filter in a 25 mm deep aluminum frame.
• Incorporates a ¾” Male Pipe Thread (MPT) galvanized drain connection.
• Return air plenum, air filter and statically and dynamically balanced centrifugal fans.
DESIGNED FOR CONCEALED APPLICATIONS.

MOTOR TYPE

• Galvanized steel fans with direct drive - impeller of centrifugal double inlet / double width type, dynamically and statically balanced.
• 3-speed, 220V-240V/1ph/50Hz motors, with permanent split-capacitor, ball bearing and built-in automatic reset thermal overload protection.
• The motor insulation is class B.

CONTROL OPTIONS

• Total Control PCB (S Type) - Integrated control board to be controlled via Infra-red handset and/or wired wall pad, including 1 Main to 32 Secondary units connection and Modbus protocol for BMS controls up to 2048 units.
• Terminal Strip Only (T Type) - Suitable for AC motor wired thermostats with L/M/H/*Auto Speed ON/OFF signals and with integrated fan relays 1-to-many zone control.

PRODUCT RANGE

• 5 models of 2 pipe 3Row from 7.29kW to 18.1kW / 24800 BTU to 61700 BTU cooling capacity & from 8.89kW to 22.08kW / 30300 BTU to 75300 BTU heating capacity.
• 5 models of 2 pipe 4Row from 8.78kW to 21.6kW / 29900 BTU to 73700 BTU cooling capacity & from 10.71kW to 26.35kW / 36500 BTU to 89900 BTU heating capacity.
• 5 models of 4 pipe 4+2Row from 8.78kW to 21.6kW / 29900 BTU to 73700 BTU cooling capacity & from 12.10kW to 29.4kW / 41200 BTU to 100300 BTU heating capacity.

PRODUCT SPECS

DCOOL

The below models have been specified under non-standard and standard conditions.

ACCESORIES